80kva 100kva Single phase oil filled pole mounted transformer

The product is the implementation of the national standard GB1094”power transformer”and GB/T6451”technical requirements of three-phase oil-immersed power transformers” and JB/10317-02”single-phase oil-immersed distribution transformer and technical requirements.”

Product Details Company Profile

Description

Place of Origin: Hebei, China (Mainland)
Brand Name: HSLEC
Model Number: D9M
Usage: Power
Phase: Single, Single
Coil Structure: Toroidal
Coil Number: other
High voltage range: 10kv
Rated Capacity: 5-100kva
Vector Group: Yyn0 Dyn11
Cooling Type: ONAN
Windings Material: Copper
Iron core: Silicon sheet
Standards: IEC,GB,ANSI
Losses: Low losses
Transformer: Single phase pole mounted transformer oil filled 80kva 100kva

1.The product is the implementation of the national standard GB1094”power transformer”and GB/T6451”technical requirements of three-phase oil-immersed power transformers” and JB/10317-02”single-phase oil-immersed distribution transformer and technical requirements.”

2. D9-M-5~100/10 series is a single-phase oil-immersed distribution transformer,single-frame double core column structure.Core material selection DQ-133-30(type 9),30ZH120(type 11),23ZH90(type 13) and other cold-rolled silicon steel sheet,the actual core material is used in the production of not less than design requirements.Slitting width tolerance of iron chip of 0.2mm,cutting burr of <0.03mm.

3.The product is fully sealed structure of corrugated tank,transformer oil and the surrounding air does not contact the outside world so the transformer oil will not absorb moisture,so as not to reduce the insulation strength;Additionally oxygen has no way to enter oil tank,thus avoiding the aging of insulating materials,improved the life of the product.

Core	1	Power transformer core is made of high-permeable grain-orientated top quality cold-rolled silicon sheet
	2	The material is cut with advanced Germany Geoge GmbH automatic shear line with the cut burrs controlled within 0.02mm.
	3	Power transformer silicon sheet fabrication adopts “no-upper yoke-lapped’ technology and all lapped joints of the silicon sheet are 45 full-miters
	4	Effectively improves no-load performance and reduces noises.

Coil	1	The high-voltage(HV) coil adopts an interleaved-continuous structure to improve the voltage characteristics under impact voltage and make voltage evenly distributed.
Coil	2	All stays and pads are chamfered to keep highly reliable insulation.