CNC water jet cutting equipment Technology
Tap water is impressed to 200-400Mpa by UHP Intensifier, and then a waterjet with high speed of 800-1000m/s is made through a small gem nozzle with bore size of 0.1-0.35mm. This waterjet has high energy and it can cut soft materials such as paper, rubber, sponge, etc. Furthermore, if mixed proper quantity abrasive, it can cut all kinds of soft and hard materials such as glass, marble, ceramics, stainless steel, etc
The CNC water jet cutting equipment includes three main parts,the following is main charactors:
1. Cutting table: a.bridge style,Pretty outline, rational structure, good rigidity ,stability
b.separated body between cutting table and platform,
c.X beam of cutting table applies the one-off extrusion forming aluminum alloy,
d.Cancelling dustproof cloth on X, Y, Z axis and hiding Y axis towline
e. flexible coupling of motor and ball screw, high qualiy ABBA ball screw and linear guide,
f. The cutting head is with casting structure and concrete structure.
Models of cutting table we can offer:
|
HD1525B
|
HD2030B
|
HD2040B
|
HD3020B
|
HD2060B
|
|
1500mm×2500mm
|
2000mm×3000mm
|
2000mm×4000mm
|
3000mm×2000mm
|
2000mm×6000mm
|
2. Intensifier pump: a. intenfier pump is developed by ourselves for 300Mpa pump,we also import from IWP America for 380Mpa pump.
b. Electronic Direction Regulation
c. 7-inch Touch Screen, Man-machine Interface Indicate Working Conditions error
d. Maximum Flow of Hydraulic Pump: 90L/min
e. Maximum Discharge Capacity: 3.7L/min
f. Integrated heat exchanger, high heat exchange ratio and good effect
g.Two-step up water supply
h. Few wear parts in the intensifier,save the cost
3. CNC controller: a.19inch LCD
b. Support DXF file ,can use AUTOCAD to produce DXF file
c. use IPC and the professional software based on windows XP
d. use Omron PLC instead of relay
4. Other accessories: auto abrasive system,on/off valve and hp tubing
5. Detail advantages of the water jet cutting equipment:
