Apply high accuracy MEMS sensor and digital technologies, can measure positive, negative or differential pressure. It can replace most of the traditional pointer mechanical gauges.
 It can measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure ｄｒｏｐ across orifice plates, liquid level of bubbler systems and pressure amplifier or hydraulic system.
 It can be used in medical care equipment to monitor blood and respiratory pressures.
 Suitable for embedded installation and wall mount
 Multiple ranges and engineering units selectable
 No any movable parts, no any effect on vibration
 The accuracy is up to ±2% FS
  　

Medium: non-combustible, non-corrosive air, not sensitive to moisture, dust, condensation and oil
Medium Temp.: 0-60°C
Materials: cast aluminum housing and PC plate
Work Environment: -20~+85°C
Compensated Temp.: 0-50°C
Work pressure: 1, 2 or 5Kpa for different ranges
overload 5xFS，burst 10xFS
Dimension: see diagram
Connection: 1/8” ID tubing, two pairs (on left side and back)
Display: 4 bits 0.8” red LED
Accuracy: ±2.0% FS(1)
Long term stability: ±0.5%FS /Year
Thermal effect: ＜0.05%FS/℃
Response time: 0.5-30s
Power: 85-265V AC
Key: 1 touch buttons
Protection: IP65
Weight: 340g
Approval: CE
Note (1): for range 0-60pa, the accuracy is 4.0%FS