Advantages

1. Vacuum environment greatly reduce the boiling point of liquid which need to evict, so vacuum drying can be easily applied to the thermal sensitive material.
2. For difficult drying samples such as powder or granulate samples, using vacuum drying method could efficient shorten drying time.
3. Various complex structure mechanical parts or other porous samples, using vacuum drying method after the parts been cleaning, then there’s no any participation substance on the parts after completely drying.
4. Operating more safe-under vacuum and sluggishness conditions, completely eliminate any explosion possibilities of oxides meeting thermal explosion.
5. Compared with common drying which rely on air circulation, Vacuum drying could let the powder samples not be air blowing or moving.

Features

1. Heating element is on the oven’s internal shelf, compared with the traditional vacuum drying oven, heating time shorten 50% (except 6050, 6051).
2. Large screen LCD display, many sets of data display in one screen, menu type operation interface, simple and understand easily, conveniently operating.
3. Adapt aluminum shelf with special stamping process, high temperature oxidation resistance and thermal conductivity is fast which could achieve min heat lost.
4. Cuboid studio which could achieve the max effective volume, microcomputer temperature controller let temp control is accurate and reliable.
5. Stalinite, bulletproff double layers glass door, which could observe the object in the oven clearly, and could input inert gases to the oven inner.
6. The tightness degree of closing the door could be adjusted by the user, the overall molding silicon rubber door seal ring ensure the high vacuum degree in the oven.
7. The oven inner use stainless steel material, the oven is made of high quality cold-roll steel sheet, and surface electrostatic plastic spraying.
8. Storage、heating、testing and drying all are in no oxygen or filled with inert gases environment, so does not lead to oxidation.

Optional Accessory

1. Intelligent programming controller: ￥1000.00.
2. Inert gases inlet valve: need RFQ.
3. Gas-liquid separator: ￥1000.00.
4. Vacuum drying cans: ￥500.00.
5. Bin (6020 / 6.30 / 6050 ): ￥1000.00.
6. Vacuum pump (2XZ-2): ￥1760.00.
7. Vacuum pump (2XZ-4): ￥2210.00.

Technical Specification