Description
The 5 "-12" double beveling machine
Speed: 80 RPM 100 RPM 125 RPM 160 RPM 200 rpm
Motor power: 15KW 1450 rpm
Dimensions: length * width * height 1050*400*820
Design for the improvement of semi automatic beveling machine type XDP double ended, the power of 15 kW motor. Table for rotary table, put two die working table, lock cylinder slide put an upper die, then put the elbow to the groove in which a lower die, the bit rate is adjusted to chamfering, double groove machine to power after the first fast forward, to the chamfering since moving into the feeding, automatic return groove after the operation, automatic stop in place (in processing groove at the same time, another mold also put an elbow). The upper die opened after the rotary table to rotate 180 degrees slope of upper die began another bend, then the slope good elbow down put an elbow, so the cycle. Groove velocity ratio without rotating table 1.5 times faster. Rail Taiwan imported linear rail, close coordination, reduced vibration, bend slope of no ripple, the beveling machine is equipped with a set of floating knife, still can put six tool car composite groove and the groove.
According to the manufacturers need to design and manufacture.