Guy wire type dead end clamp
The guy-wire dead end clamp for conductor can be applied to bear strain on overhead bared or insulated covered conductors in transmission & distribution lines. It's the substitutes of the traditional dead end clamps such as bolted type, compression type and wedge type.

Our company TCI (DALIAN TUCHENG INTERNATIONAL CO.,LTD) has been suppling this dead end grip for couple of years,both in direct phurchase from European user and electricity construction project/tender.

GALVANIZED STEEL HELIFORMED STAY WIRE OF DIAMETER RANGE (11.8-12.2) MM

SUITABLE FOR ATTACHING (7/4.0) MM

STEEL STRAND STAY WIRE TO STAY THIMBLES,

MINIMUM RATED HOLDING STRENGTH (9,500) KGF

RIGHT HAND LAY DIRECTION AND CROSS OVER STARTING AT (140) MM.

Below is the drawing of our heliformed stay grip(dead end grip,guy wire,strain grip,dead-end clamps)

TCI heliformed dead-end grip, dead end grips,stain grips,dead-end clamps