222 thread locking agent low strength, thixotropic viscosity
Suitable for most metal surfaces, common tools available demolition. For M2-M12 thread locking and sealing. Applied to the fastener diameter of 1/4 "(6mm) or less ideal, with some lubrication in order to achieve accurate clamping load.

242 strength thread locking agent
General purpose, thixotropic viscosity. Lock for M6-M20 threads solid sealing. It is a common tool available removable thread locking agent. It has some lubricity for accurate clamp loads.

243 thread locking agent resistance to oil / medium intensity
Fast curing, can be used for inert surface, good oil content. Easy to disassemble and can be used on the working surface of the minor oil contamination. For precoating agent Loctite Dri-Loc bolt disassembly after re-locking time. It can be used for M20 the following thread locking and sealing.

262 thread locking agent in high intensity
Suitable for most metal surfaces. Thixotropic viscosity, good chemical resistance. For M20 the following thread locking and sealing. Is a permanent locking thread locking agent, in extreme chemical / environmental conditions have excellent rust and corrosion resistance.

263 high strength thread locking agent
With high temperature resistance and oil resistance, for active metal and an inert substrate, viscosity: 400 / 600cP, curing time: 5 minutes early solid Full - 24 hours.

270 high strength thread locking agent
Suitable for most metal surfaces. Thixotropic viscosity, chemical resistance, is a permanent locking thread locking agent, in extreme chemical / environmental conditions have excellent rust and corrosion resistance.

271 thread locking agent high temperature / high strength
High temperature of 230 ℃. It can be used for cylinder head stud thread locking. For most surface provides rapid cure including fasteners not as prepared surface. Recommended for 1.5 "(36mm) diameter bolt or less. When you unpack be heated and tools.

272 thread locking agent high temperature / high strength
High temperature of 230 ° C. It can be used for cylinder head stud thread locking. For most surface provides fast curing comprises uncleaned fasteners. Recommended for 1.5 "(36m) diameter bolt or less. When you unpack be heated and tools.

277 high strength thread locking agent
High viscosity. Excellent chemical resistance. M36 thread for permanent locking and sealing. Prevents rust and corrosion thread, with heating and tools apart.

290 thread locking agent penetration level
Medium strength, low viscosity, fast curing. It has been assembled for M2-M12 thread locking and sealing. Can also be used to seal welds, castings trachoma (¢ 0.10mm or less) micropores. Prevent thread rust and corrosion, local heating and tool takes apart.

We also have 401,406,495,496,414,416,415,460,403,435,410,480,409

601,603,609,620,638,648,680,660,649,6300

Product Storage informations:

1.  Storage Store product in the unopened container in a dry location. Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties)

2. Storage Store product in the unopened container in a dry location. Optimal Storage: 2 °C to 8 °C. Storage below 2 °C or greater than 8 °C can adversely affect product properties.)

3. After the glue is removed from the container during use, may be contaminated, do not return it to its original container!)

Shenzhen Acmeen Technology Co., Ltd.

Year Established:2012

Business Type:Manufacturer and Trading Company

Management Certifiation: ISO9001

Operational Address: (Office) Room 5A, 5/F, Mingzhu Business Building, No. 862, Meilong Avenue, Longhua St., Baoan Dist., Shenzhen, Guangdong, China (Mainland)