Specifications

IBR roof roll forming machine
1.material thickness:0.4-0.6mm
2.feeding width: 925mm
3.effective width:685mm

 IBR roof roll forming machine  

This profile are popular used in Africa countrys.

Machine composition:

5Ton*1250mm Hydraulic un-coiler

Hydraulic system expand coil inner hole, Pump motor: 3KW

Frequency Inverter to regulate turning speed, Motor: 2.2KW

Link-connect expanding system

Automatic stopping device, Load capacity = Max.5Tons

Coil Inner-diameter= 510±30mm, Coil width = Max.1250mm

Dance arm assistance for coil-turning speed control

Manual Pre-shearing device (Un-powered)            

Smart cut control, to cut off the end of the final piece of sheet only

Cold Rolling Mills

 Feeding section with guide;

 Gear/Sprocket driving;20-step to form

 Rollers manufactured from 40Cr, CNC lathes, hard Chrome Coated

 Shafts Diameter=75mm, Precision Machined

 Main motor =7.5 KW, Frequency speed control

 Forming speed:Approx. 15m/min;

 Protection Mesh Cover (full mesh type) Above Roll-former To Avoid Hands Go Inside

Hydraulic Cutting Device

Stop to cut, Post cut, No Blanking cut

Pump motor =4.0KW

Cutting tool material : Cr12, Heat treatment;

PLC Control System

Control the quantity & cutting length automatically;

Combined with: PLC, Touch Screen (SIEMENS), Inverter (SCHNEIDER), Encoder (Omron), etc

Cut-to-length tolerance≤±2 mm

Control Voltage 24V