LPG-5 PLC Control or Micro ComputerSpray Dryer Milk Powder

Operation System: Touch Screen or Button Operation； Inlet Temperature: 140-350( Automatically Controlled)； Operational Method: Intermittent； Drying Medium: Superheated Steam；

Product Details Company Profile

Description

Model NO.: LPG
Item Name: Spray Dryer Milk Powder
Evaporation Capacity: 5kg/H
Working Principle: Powder Mixed with Spay Granulate and Dry Through H
Control System: PLC Control or Micro Computer
Safety Protector: Available
Structure: Spraying Drier
Operation Pressure: Atmospheric Dryer
Movement Way: Spraying
Type of Atomization: Pressure Atomization
Appearance of Dried Sample: Suspesion
Specification: CE, GMP
HS Code: 8419399090

Heating Mode: Dielectric
Model: LPG-5
Material Consist: Ss304(Ss316 Is Available)
Application: Powder
Operation System: Touch Screen or Button Operation
Inlet Temperature: 140-350( Automatically Controlled)
Operational Method: Intermittent
Drying Medium: Superheated Steam
Type of Flow: Contra-Flow
Sprayer: Pressure-Type
Trademark: LTPM China
Origin: China

1. Simple Introduction:
Spray drying is the widest used technology in the liquid shaping technology and in the drying industry. Centrifugal Atomizing (Spray) Drying Equipment is most suitable for producing powder, particles or solid block products from materials of solution, emulsion, soliquoid and pumpable paste states. Therefore, spray drying is useful to create the desired particle size, residual water contents, the stocking density, and the particle shape needed to meet precise standards

2. Working principle:
The air is through the filter and heater, the air distributor which enters the dedicator top, the hot air takes the form of spiral and enters the dedicator evenly. The material liquid , from the material liquid trough from the at odds with the community or the leadership atomizer for the dedicator top of pump sending through the filter, make the material liquid gush out into an extremely small calorific drop, material liquid and hot air flow and keep in touch, moisture evaporate rapidly, within extremely short time dry to become finished product, finished product discharge by dry tower bottom and whirlwind separator, the waste gas is discharged by the air blower.

Main technical Data

Item	Specification
Water Evaporation	5kg/h
Method of Atomizing	High Speed Centrifugal Atomizer (mechanical drive or stepless frequency speed regulation is available)
Revolution of atomizer(rpm)	15500
Diameter of Atomizing disc (mm)	60
Dried Powder Recovery Rate (%)	Around≥95
Length of Covered Area(m)	1.6
Width of Covered Area(m)	1.1
Height of Tower Body(m)	2.2
Hoisting height of Nozzle(m)	1.8
Air input Temp	160~200ºC
Air output Temp	70~90ºC
Tower Height	1750mm
Induce Fan Power	3 kw
Air Blower Fan Power	2 kw
Feeding pump power	1 kw
Nebulizer Power	2 kw
Vibrator air volume	1CBM/min
E-Heating Power	12 kw