Description
Introduction:
The LTP series reliable high voltage switching mode DC power supply with high output accuracy and low ripple, compared to traditional linear HV power supply, it has similar output precision degree but faster response time and higher efficiency.
It is designed for lab use or other conditions need precise & stable HV output.
Features:
CV/CC working modes
Output voltage adjustable from 0 to 100%
Output current adjustable from 0 to 100%
Operate either in constant voltage or constant current mode
IGBT based series resonant inverter up to 50kHz
Forced air cooling, very rugged design
Full local or remote control
Technical Specification:
Input Voltage: 220V±10%
Output Power: 100W ~ 1KW
Output Voltage: 1KV/2KV/3KV/4KV5KV/10KV/20KV/30KV/60KV/80KV/100KV (for other output voltages, please contact us), adjustable output voltage.
Output current: 0.1A~1A, (for other output current, please contact us), adjustable output current.
Output polarity: positive or negative
Output adjusting mode: 10-turn potentiometer or 0~10V analog signal control or RS port.
Line regulation: ≤0.1%
≤0.01% (optional)
Load regulation: ≤0.1%
≤0.01% (optional)
Temperature coefficient: ≤0.1%/℃
Time drift: ≤0.1%/hour
Ripple: ≤0.1%
Total Efficiency: ≥85%
Output display: 41/2 digital meter
MTBF: 50000 hour @ 25℃
Protection
Over current protection
Short-circuit protection
Load discharging protection
Cooling: Forced air cooling
Dimension: as per output required
Weight: as per output required
Note: every power supply has 48 hours full load burn-in test @ 40℃
Environment conditions:
Working environment conditions:
Temperature:-10℃ ~ 40℃
Relative humidity: <90% (non-condensing)
Height: 4000m
Storage environment conditions:
Temperature: -20℃ ~ 60℃
Relative humidity: 10% ~ 90%
Height: 4000m
Safety caution:
This power module has HV output, only professional person could operate it.
Please check power module as below before start-up
Keep power module clean and good ventilation.
HV input & output connectors or HV load no touch anything.
Please check back current of load well connected with GND bolt at the back of power module.
Yangzhou IdealTek Electronics Co., Ltd.
Year Established:2015
Business Type:Manufacturer and Trading Company
Management Certifiation: ISO9001
Operational Address: No. 8-343 (Huatai Shouxi Int'l Bldg.) Wenchang Middle Road, Guangling Dist., Yangzhou, Jiangsu, China (Mainland) Year Established: 2015
Verified Supplier
Credit Check