Multi Function Control Temperature Shock Test For Metal / Plastic / Electronic

Temperature Shock Tester is used to test the bearing extent of the material structures and composite material in an instant and continuous high temperature and extremely low temperature environment , that is in the shortest time to test its thermal expansion and contraction caused by chemical change or physical harm. Application objects, including metal, plastic, rubber, electronics ... and other materials can be used as a basis to improve their products or reference.

Product Details Company Profile

Description

1. Description:

Temperature Shock Tester is used to test the bearing extent of the material structures and composite material in an instant and continuous high temperature and extremely low temperature environment , that is in the shortest time to test its thermal expansion and contraction caused by chemical change or physical harm. Application objects, including metal, plastic, rubber, electronics ... and other materials can be used as a basis to improve their products or reference.

Temperature Shock Environmental Test Chambers With Multi Function Control

2. Specification:

Model	HD-E703-50 Temperature Shock Tester
Interal Dimension:	(W×H×D)40×36×35 cm
Structure:	Two chambers design(the hot chamber or the cold chamber)
Damper device:	Forced air drived damper
Interior material:	SUS# Stainless steel plate
Exterior material:	SUS# Stainless steel plate
Basket material:	SUS# Stainless steel plate
Refrigeration:	Cascade refrigeration system
Cooling method:	Water
Ambient temperature:	0°~30°
Preheating temperature:	above freezing 60.00°C~above freezing200.00°C
Precooling temperature:	subzero 10.00°~ subzero 70.00°C
H.T. Shocking:	above freezing 60.00°C~above freezing 150.00°C
L.T. Shocking:	subzero 10.00°C~subzero 65.00°C
Temperature uniformity:	±2.00°C
Simulated load ic	5.0kg
HT IN-Zone	subzero 65.00°C~above freezing 150.00°C/5min
LT IN-Zone	above freezing 150.00°C subzero 65.00°C
Preheating time:	30MIN
Precooling time:	60MIN
Senor:	T×4
Controller:	OYO-8226
Setting range:	Temperature:subzero 100.00°C~above freezing 200.00°C/TIME:OHIM~999H/CYCLE:0 ~9999
Resolution:	Temperature:0.1°C
Output mode:	PID and SSR(control method)
Power(K.W)	AC380V 50HZ 18KW

3. Features

Temperature Shock Tester

Micro processor, multi function control. To control and monitor the compressor, the solenoid valve and the heater .
When faults occur, the auto detection and protection function will activate and will automatically cut off the power, the LCD screen will shows the fault status.
Appointment function , the equipment can be activate and start for operation through setting (Year, month, date, hour and minute)
Accumulation operation time provide a record for management and maintanence.
Setting of the backlite of the LCD can extend the useful life of the LCD.
Can choose one paragraph of control or the multi-screen process to increase the convenience of its operation.
Curve drawing function: After setting up the operation parameters or during the running mode, you can call out the screen to understand the running situations and conditions.
Program execution can be suspended (HOLD), Jump paragraph (ADV) and other procedures involved in setting.
Recovery time and test time WAIT function.
Power breakdown recovery function, can select BREAK, COLD, or HOT.