Description
Product description:
1. There are two grids (one cooking grid and one pizza stone side combustion style) in the oven.
2. Installing push-pull type grease drawer under the cooking grid.
3. There is a charcoal firebox underneath.
4. Installing igniting plate that guiding to two sides, full circulating flue is high temperature, the aggregation temperature of 500℃ in the oven.
5. Installing adjustable convective vent on the top and bottom.
6. The side and rear of the oven are protected by high-density connector, 80mm – 100mm insulation layer.
7. The front oven door frame put insulation bricks to decorate.
8. Double-layer single-open sealed oven door.
Detail information:
Body: outside surface is made of cold-drawn iron wire, surface treatment is black matte powder coated; 2.0mm cold rolled sheet door, surface treatment is high temperature resistant painting in black; with spring handle, chrome plating; there is adjustable air damper on the door; the plane of the combustion room pave 80mm pizza stones; A round thermometer 50-750℃
Cooking grid: 380mm x 380mm, cold-drawn iron wire, diameter is 4.0mm-6.0mm, surface treatment is high temperature resistant painting in black
Grease drawer: 1.0mm cold rolled sheet, surface treatment is black matte powder coated
Ash drawer: 510mm x 445mm, 1.0mm cold rolled sheet, surface treatment is black matte powder coated
Igniting plate: 1.0mm cold rolled sheet, surface treatment is high temperature resistant painting in black.
Smoker stack: 150mm (dia.) x 620mm (H), 1.0mm cold rolled sheet, surface treatment is high temperature resistant painting in black
Bottom plate: 453mm x 774mm, 1.0mm cold rolled sheet, surface treatment is black matte powder coated
Leg: 3.0mm cold rolled sheet, surface treatment is black matte powder coated