Do you want to remove "electric slickline equipment" from your favorites?
Remove Now
Cancle
Internal pressurization burst tester
Internal pressurization burst tester is a seal strength test that tests for package seal failure when the package is exposed to a pressure differential. This test method is an indicator of the burst strength of a package and detects the weakest area of the seal, providing a measurement of the pressure required to burst open the package.
The two standards are
ASTM F1140: Standard Test Methods for Internal Pressurization Failure Resistance of Unrestrained Packages
ASTM F2054: Standard Test Method for Burst Testing of Flexible Package Seals Using Internal Air Pressurization within Restraining Plates
Features
1. Three test modes of burst, creep and creep to failure are available on Burst Strength Tester.
2. PLC programmable logic controller realizes precise pressure and time control.
3. 7 inch TFT touching screen for convenient parameter setting and test operation.
4. Multiple groups of test parameters can be save to avoid the repetitive setting time.
5. Test result auto statistics and storage.
6. Dual test methods of restraint distension and unrestraint distension
7. Program customization available.
Technical Specifications
Pressure Range 0 ~ 600 KPa; 0 ~ 87.0 psi (Standard)
Inflating Head Φ4mm (Standard)
Gas Pressure 0.4 MPa~0.9 MPa
Port Size Φ6 mm PU hose
Dimensions 400 mm (L) × 270 mm (W) × 180 mm (H)
Pedestal Size 375 mm (L) × 275 mm (W) × 345 mm (H)
Power AC 220V 50Hz
Description
Burst tester is a seal strength test that tests for package seal failure when the package is exposed to a pressure differential. This test method is an indicator of the burst strength of a package and detects the weakest area of the seal, providing a measurement of the pressure required to burst open the package.
The two standards are
ASTM F1140: Standard Test Methods for Internal Pressurization Failure Resistance of Unrestrained Packages
ASTM F2054: Standard Test Method for Burst Testing of Flexible Package Seals Using Internal Air Pressurization within Restraining Plates
Features
1. Three test modes of burst, creep and creep to failure are available on Burst Strength Tester.
2. PLC programmable logic controller realizes precise pressure and time control.
3. 7 inch TFT touching screen for convenient parameter setting and test operation.
4. Multiple groups of test parameters can be save to avoid the repetitive setting time.
5. Test result auto statistics and storage.
6. Dual test methods of restraint distension and unrestraint distension
7. Program customization available.
Technical Specifications
Pressure Range 0 ~ 600 KPa; 0 ~ 87.0 psi (Standard)
Inflating Head Φ4mm (Standard)
Gas Pressure 0.4 MPa~0.9 MPa
Port Size Φ6 mm PU hose
Dimensions 400 mm (L) × 270 mm (W) × 180 mm (H)
Pedestal Size 375 mm (L) × 275 mm (W) × 345 mm (H)
Power AC 220V 50Hz
Cell Instruments Co., Ltd.
Year Established:
Business Type:
Management Certifiation:
Operational Address:
Verified Supplier
Credit Check
More from this Supplier