1.Do not use fans or other devices directly to the repair station hair when it works, otherwise it will lead

to negative differential heating plate surface , burn the workpiece

2.When the machine is on working, high-temperature heating zone can not be any direct contact with

the object , it may cause fire or explosion ,and the PCB workpiece should be placed on the PCB support

shelves

3.Do not shake rework station , and move gently

4.Do not touch the high fever area , otherwise you will burned

5.When turned on, do not use the flammable spray , liquid or flammable gas near the repair station

6.Do not try to modify rework station , otherwise it will cause fire or electric shock

7.Electrical box has the high-voltage components , do not attempt to disassemble

8.If the metal objects or liquids fall into the repair station when it works , immediately disconnect the

power , unplug the power cord until the machine to cool down , then completely remove litter , dirt ; 

if dirt left ,there is odor when reboot

9.When abnormal heating or smoking, immediately disconnect the power , and inform the technical

service to repair It needs to disconnect the wires between the electrical boxes and machine parts, and

have to hold the plug, otherwise it leads to poor contact, and does not work

10.Note that the repair station not to press or run over other electrical equipment or power lines or

communication cable , and it may cause device malfunction or cause fire or electric shock

11.Before use the rework station, you must read this manual carefully